Cold Cannon and Flame Cannon Bundle - Legends Of Tomorrow - Printable - STL files Model Cetak 3D

Hi! We glad introduce you 3d model - STL files - to print your own Cold Cannon and Flame Cannon Bundle from Legends of Tomorrow.

Lot include:

- Captain Cold Cannon with demo stand - Printable 3d model (https://3dexport.com/3dmodel-cold-cannon-legends-of-tomorrow-printable-stl-files-426535.htm)
- Heat Flame Cannon with demo stand - Printable 3d model (https://3dexport.com/3dmodel-flame-cannon-legends-of-tomorrow-printable-stl-files-426536.htm)
- 57 stl files to 3d printing Flame Cannon (biggest part demensions: 139*132*30 mm).
- 5 stl files - stand for Flame Cannon (biggest part demensions: 185*110*32 mm).
- 48 stl files to 3d printing Cold Cannon (biggest part demensions: 170*140*60 mm).
- 3 stl files - stand for Cold Cannon.
- Digital Instructions for assembling.
- Lists of components you will needs for assembling with discription.

List of components needs for assembling Flame Cannon with LEDs lighting:

- 3-4mm LEDs + 24 ohm resistors
- 1x8mm stud – 220mm and 2xM8 nuts for it
- 1pcs 2xAA batteries slot
- 8*8mm button switch
- M3 screws
- wires
- insert nuts 3*5*4mm

The model assumes a demo stand and the presence of LED backlight.

Dimensions of Flame Cannon: 413 x 188 x 131 mm (16.3" x 7.4" x 5.1")

List of components needs for assembling Cold Cannon with LEDs lighting:

- 3-4mm LEDs
- 1x8mm stud – 330mm
- 2xM8 nuts
- 1xAAA batteries slot
- 8*8mm button switch
- M3 screws
- wires
- insert nuts 3*5*4mm

The model assumes a demo stand and the presence of LED backlight.

Dimensions of Cold Cannon: 460 x 185 x 64 mm (18"x7.3"x2.5")


If there is a different design you would like have, and don't see it in our list of products. Then please do not hesitate to contact us, and we will see what we can do.

Legal notice
This is not an officially licensed product and is only considered Fan Art, the item is 3D model designed for fan art by me.

FOR PERSONAL USE ONLY. NOT INTENDED FOR COMMERCIAL PRINTING.