English
Español
Deutsch
日本語
Polska
Français
中國
한국의
Українська
Italiano
Nederlands
Türkçe
Português
Русский
हिंदी3DP2BLROD60A-3D Printable Iris mechanism Model Cetak 3D
dxf
monk3947
Mechanical parts
dxf
monk3947
Mechanical parts
stl
monk3947
Other
dxf
monk3947
Mechanical parts
- Format yang tersedia: STEP: step 2.39 MB
- Koleksi:No
- Siap Cetak:
- Pindai 3D:No
- Konten Dewasa:No
- PBR:No
- Tampilan:2090
- Tanggal: 2022-09-24
- ID Barang:415506
- Peringkat:
Iris mechanism or taiji mechanism designed for 3d print. There are 2 leaves. Then you rotate the "Drive Part"or the middle plate, the center hole can open or close gradually. The center hole is diameter 60mm, the outer size is diameter 140mm and thickness is 12.5mm. To assemble the parts togther,some M2 screws are needed. Parts are designed for 3d printing. It is best to use resin material when 3d printing. And you may need to sand some parts due to the 3d printing quality.
Parts should be printed separately and then assembled together.
Baca lebih lanjutParts should be printed separately and then assembled together.
Perlu lebih banyak format?
Jika Anda membutuhkan format yang berbeda, silakan buka Tiket Dukungan baru dan minta itu. Kita dapat mengonversi model 3D menjadi: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Kami tidak mengonversi adegan 3d dan format seperti .step, .iges, .stp, .sldprt.!
Jika Anda membutuhkan format yang berbeda, silakan buka Tiket Dukungan baru dan minta itu. Kita dapat mengonversi model 3D menjadi: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Kami tidak mengonversi adegan 3d dan format seperti .step, .iges, .stp, .sldprt.!
Unduh 3DP2BLROD60A-3D Printable Iris mechanism Model Cetak 3D step Dari monk3947
irisdiaphragm irismechanism mechanism mechanical 3dprintable mechanical-model kinematics boxes coverTidak ada komentar untuk item ini.
